IPS e.max® ZirCAD Prime
This revolutionary material provides exceptional quality and aesthetics and covers a wide range of dental indications – from single crowns to 14-unit bridges. IPS ZirCAD Prime is a 'One-Disc Solution': it enables top-quality results while optimizing laboratory efficiency and costs. Gradient Technology (GT) represents a new, unique manufacturing method.
Technical specification:
- Flexural strength:
- 5Y-TZP (upper layer of disc): 650 MPa1
- 3Y-TZP (lower layer of disc): 1200 MPa1
- Maximum possibilities: staining, cut-back, layering and infiltration technique
- Available shades: A1, A2, A3, A3.5, A4, B1, B2, B3, B4, C1, C2, C3, C4, D2, D3, D4, BL1, BL2, BL3, BL4
IPS e.max® ZirCAD MO
IPS e.max ZirCAD MO was developed for use in the classic veneering technique. Even heavily discolored stumps and metal posts can be effectively masked due to the increased opacity of the material.
Technical specification:
- Indications: frameworks for crowns and bridges
- Implant-supported structures
- Processing techniques: veneering, press-on veneering, CAD-on
- Available shades: MO-0, MO-1, MO-2, MO-3, MO-4
IPS e.max® ZirCAD LT
IPS e.max ZirCAD LT is the most versatile material in the portfolio. It combines high mechanical strength (1200 MPa) with natural aesthetics.
Technical specification:
- Mechanical strength: 1200 MPa
- Indications: anatomical crowns, bridges, implant structures
- Processing techniques: glazing, characterization, infiltration, veneering
- Available shades: A1, A2, A3, A3.5, A4, B1, B2, B3, B4, C1, C2, C3, C4, D2, D3, D4, BL
IPS e.max® CAD CEREC®/inLab®
IPS e.max® CAD is a glass-ceramic (lithium disilicate) used in dentistry that combines exceptional aesthetics with durability, ideal for prosthetic restorations such as crowns, veneers, inlays and onlays. The material is excellent for full-contour restorations. It offers a wide processing range, high biaxial flexural strength - 530 MPa[2] and high fracture toughness 2.11 MPa m1/2[3]
Technical specification:
- IPS e.max CAD HT (High Translucency) - highly translucent block dedicated to smaller restorations, e.g., inlay/onlay
- IPS e.max CAD MT (Medium Translucency) - medium translucency block, used for restorations requiring greater brightness than HT
- IPS e.max CAD LT (Low Translucency) - low translucency block, suitable for most restorations
- IPS e.max CAD MO (Medium Opacity) - block with particular opacity recommended for frameworks on slightly discolored stumps
- Available shades: BL1, BL2, BL3, BL4, A1, A2, A3, A3.5, A4, B1, B2, B3, B4, C1, C2, C3, C4, D2, D3, D4
Remanium Star Powder
Specialized dental CoCr alloy powder for producing crown, bridge and skeletal denture structures using laser sintering technology.
Technical specification:
- Composition: Co-60.5%, Cr-28.0%, W-9.0%, Si-1.5%
- Tensile strength: 1170 MPa
- Hardness: 395 HV10
- CTE (25-500°C): 14.4x10⁻⁶K⁻¹
Scheftner MoguCera C Disc
CoCr alloy in disc form for milling metal structures for crown and bridge frameworks.
Technical specification:
- Composition: Co-65%, Cr-28%, Mo-5%, Mn-1%
- Tensile strength: 597 MPa
- Vickers hardness: 288 HV10
- CTE: 114.8x10⁻⁶K⁻¹
Sheftner Starbond Ti5 Disc
Ti5-type alloy in disc form for milling. Intended for implant-supported works such as beams or suprastructures as well as crowns and bridges.
Technical specification:
- Composition: Ti - 89.4%, Al 6.2%, V 4.0%, Others <1%
- Yield strength (Rp0.2): 900 MPa
- Tensile strength: 930 MPa
- Elongation at break: 10%
- Vickers hardness: 330 HV 5/30
- Density: 4.4 g/cm³
- CTE: 10.3 µm/m * 10-6 K-1
PoliDent PMMA Multilayer Disc
Multilayer PMMA disc material designed for milling temporary crowns and bridges.
Technical specification:
- Vickers hardness: min 26 HV
- Flexural strength: min. 114 MPa
- E-modulus: min. 2771 MPa
- Available shades: A1, A2, A3, B1, D2
PoliDent PMMA Disc MONO
Monochromatic PMMA material used for temporary crowns and bridges and for try-in constructions prior to final works.
Technical specification:
- Vickers hardness: min 26 HV
- Flexural strength: min. 114 MPa
- E-modulus: min. 2771 MPa
- Residual monomer <1%
- Available shades: A1, A2, A3, B1, B2, B3, BL1, BL2, BL3
KERA®S-Powder (10-45µm)
Specialized dental CoCr alloy powder for producing crown, bridge and skeletal denture structures in laser sintering technology.
Technical specification:
- Composition: Co 61.65%, Cr 27.75%, W 8.45%, Si 1.51%, Mn 0.25%, Fe 0.2%
- Tensile strength: 1021 MPa
- Hardness: (HV 10/30)
- CTE (25 - 500°C) (10¯⁶K¯¹)